Sugar Skull 2

$4.95

• Description
• Size & Features
• Instructions

• Day of the Dead beauty
  
• Size: 2.5"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sully - Monsters Inc

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0" Round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sun with Smile

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Superman

$4.95

• Description
• Size & Features
• Instructions

• You will look super with this amazing Superman glitter tattoo.
• Size: 2.0" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Surfer Mickey

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swan

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0" Tall x 2.0" Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swimming Mermaid

$4.95

• Description
• Size & Features
• Instructions

• This Mermaid stamp creates a beautiful glitter tattoo for your princess.
• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
• Size: 1.5" x 3.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirl Christmas Tree

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirl Heart

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirl Mermaid

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 3.5" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirly Angel

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirly Bumble Bee

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirly Butterfly

$4.95

• Description
• Size & Features
• Instructions

• Delicate and simple butterfly.
• Size: 2"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swords

$4.95

• Description
• Size & Features
• Instructions

• This Swords stamp creates a glitter tattoo to show your pirate side.
• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
• Size: 3.0" x 2.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

T-Rex Bones

$4.95

• Description
• Size & Features
• Instructions

• Legendary dino bones.
  
• Size: 2.75"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

T-Rex Dinosaur

$4.95

• Description
• Size & Features
• Instructions

• Show your wide and prehistoric side with this small T-Rex dinosaur glitter tattoo.
• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
• Size: 3.0" Wide x 1.75" Tall
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

T-Rex Dinosaur Head

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.25" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Texas A&M

$4.95

• Description
• Size & Features
• Instructions

• This Texas A&M stamp creates a glitter tattoo to show your team support.
• Size: 2.5" x 1.75" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Texas Christian University

$4.95

• Description
• Size & Features
• Instructions

• This TCU stamp creates a glitter tattoo to show your team support.
• Size: 2.0" x 1.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Texas Tech

$4.95

• Description
• Size & Features
• Instructions

• This Texas Tech stamp creates a glitter tattoo to show your team support.
• Size: 2.0" x 1.75" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Texas with Star

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 2.0"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Thinking Fairy

$4.95

• Description
• Size & Features
• Instructions

• Thinking about fun Fairy
  
• Size: 1"Tall x 2.25"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Thundercat

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 1.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tombstone Hand

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0"Tall x 1.5"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Toucan

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 1.75" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tractor

$4.95

• Description
• Size & Features
• Instructions

• This Tractor stamp creates a glitter tattoo for the rancher style.
• Size: 2.0" x 1.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Treble Clef Music Note

$4.95

• Description
• Size & Features
• Instructions

• This Treble Clef Note stamp creates a glitter tattoo for the musician.
• Size: 2.0" x .75" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase.
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Triangle Shield

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" 
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Bull

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Butterfly

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Feather

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 4.0" tall x 1.25" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Lizard

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.75" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Monkey

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Scorpion

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.25" Tall x 1" Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Shark

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.65" x 3.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Sword

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.75" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Turtle

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.25" tall x 2.50" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Tribal Ying Yang

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Triple Butterflies

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 3.00" Tall
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Turkey

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Twinkle Butterfly

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.25" tall x 1.5" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Two Headed Dragon

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.25" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Unhappy Emoji

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Unicorn - Fancy

$4.95

• Description
• Size & Features
• Instructions

• This Unicorn stamp creates a fun glitter tattoo for the free spirited.
• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
• Size: 3.0" x 2.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Unicorn Ears

$4.95

• Description
• Size & Features
• Instructions

• It sounds like a sweet unicorn.
  
• Size: 1.5"Tall x 2.5"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

University of Central Florida

$4.95

• Description
• Size & Features
• Instructions

• Show your school spirit with this UCF glitter stamp.
• Size: 3" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

University of Texas

$4.95

• Description
• Size & Features
• Instructions

• This University of Texas stamp creates a glitter tattoo to show your team support.
• Size: 2.5" x 2.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

USA

$4.95

• Description
• Size & Features
• Instructions

• This USA stamp creates a glitter tattoo to show off your patriotism.
• Size: 2.25" x 1.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase.
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.