Poop Emoji

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" tall
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Pot Leaf

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Prancing Unicorn

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Prima Ballerina

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" tall
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Princess Crown

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.75" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Puff Dragon 2

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Puppy Face

$4.95

• Description
• Size & Features
• Instructions

•  
• Size: 1.75" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Puzzle Pieces

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.5" each 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rabbit

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Race Car

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5"Tall x 2.0"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rainbow in Clouds

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rainbow Unicorn

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Randall - Monsters Inc

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" Tall x 2" Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Razor Heart

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 1.75" tall x 2.25" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rebel Alliance

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Reindeer Face

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 2.25"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Robot #1

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x1.75"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Robot #2

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rocket with Flames

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0 x 1.0"  
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rooster

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rose

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rubber Duck

$4.95

• Description
• Size & Features
• Instructions
• 
  
•  
• Size: 1.5" round  
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sand Dollar

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 2.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sanio Cat

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Santa Claus

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5"Tall x 2.0"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Santa Face

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0"Tall x 2.0"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Santa Hat

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Santa Sleigh

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 1.75"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Scallop Cross

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.5" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Scarecrow

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Scary Pumpkin

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Scorpion

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.25"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Scream Mask

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.25"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sea Turtle

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 2.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Seahorse

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" tall x .75"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Shamrock

$4.95

• Description
• Size & Features
• Instructions

• Size: 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Shark

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.75" x 1.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sheriff Badge (in circle)

$4.95

• Description
• Size & Features
• Instructions

• . 
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Ship Wheel

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Shooting Soccer Ball

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Shooting Star

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Silly Pumpkin

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" Round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Single Music Note

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sinister Ghost

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.75" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sitting Fairy

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Skull

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Skull and Cross Bones

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Smiling Lego Head

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.