Butterfly

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 2.0"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Sea Turtle

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 2.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swimming Mermaid

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.5" x 3.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fancy Butterfly

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 2.0"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rose

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Prancing Unicorn

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fancy Unicorn

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" x 2.5" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Baseball / Softball

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" Round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dolphin #2

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Triple Butterflies

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" Tall x 2" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Hibiscus Flower

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fancy Heart

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dragonfly

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 1.50"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flower with Stem

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2.0" 
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Lady Bug

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 1.75"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Basketball

$4.95

• Description
• Size & Features
• Instructions

• Size: 2"" Round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Wonder Woman

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.0" x 1.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fairy

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.75" x 2.25"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rainbow in Clouds

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Princess Crown

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.75" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Heart Wings 2

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Owl

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 1.75"  
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Bumble Bee

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Mermaid 1

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 3.5" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Floral Vine

$4.95

• Description
• Size & Features
• Instructions

• Size: 4" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Kitty Cat

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" tall  x 1.5" wide
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Heart Unicorn

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Alligator

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fairy with Wand

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dog

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Rubber Duck

$4.95

• Description
• Size & Features
• Instructions
• 
  
•  
• Size: 1.5" round  
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dolphin

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Baby Shark

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.25"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Pointing Fairy

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x  2.25"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Barbie Profile

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5"Tall x 2.0"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Mickey & Minnie Dancing

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2.0"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirly Butterfly

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2"Tall x 2"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dream Catcher 2

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.75"Tall x 1.5"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Butterfly Fairy

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.75" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Star Unicorn

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 1.75" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Frozen

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.25"Tall x 1.25"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Open Heart

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Kitty Cats in Love

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" tall  x 2.5" wide
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Diamond

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Cheerleader

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Daisy Flower

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" Round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Gerber Daisy Flower

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" tall x 1.75" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Swirl Mermaid

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.5" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.