Ninja Turtle
$4.95
- Size: 2.5"x2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Baby Alligator
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Axolotl
$4.95
- Size: 2.5"x2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Minecraft Sword
$4.95
- Size: 2.5"L
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Heart with Awareness Ribbon
$4.95
-
Size: 2" x 2"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Pokemon - Pikachu 1
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Robot #1
$4.95
- Size: 2.25" x1.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Sonic the Hedgehog
$4.95
- Size: 2.5"R
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Star Arch
$4.95
- Size: 3.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flying Dragon 2
$4.95
- Size: 2.5" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
6-Petal Flower
$4.95
- Size: 2" round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Pokemon - Ball
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Pokemon - Evee
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Dragonfly 2
$4.95
-
Size: 2" x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Winking Lego Head
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Smiling Lego Head
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Star Flag
$4.95
- Size: 2.5"x2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Spider Symbol
$4.95
- Size: 2" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Octopus 2
$4.95
-
Size: 2.25" x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Tulip Swirl
$4.95
- Size: 2.25" L x 1.5" T
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Baby Butterfly
$4.95
- Size: 2"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Koala Bear
$4.95
- Size: 2"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Infinity Heart #1
$4.95
- Size: 2.5" x 1.25"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Spider & Mask
$4.95
- Size: 2" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Dolphin Outline
$4.95
- Size: 2.0" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Dripping Heart
$4.95
-
Size: 2" x 2.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Pokemon - Charmander
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Narwhal
$4.95
- Description
- Size & Features
- Instructions
-
Size: 2" round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Swirly Dolphin
$4.95
- Size: 2.0" x 1.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Kissing Mickey & Minnie
$4.95
-
Size: 2.5" x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Butterfly Outline
$4.95
- Size: 2"Tall x 1.25"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Butterfly Profile
$4.95
- Size: 2"Tall x 1.75"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Robot #2
$4.95
- Size: 2.25" x1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Jaguar
$4.95
- Size: 3" x 2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Witch Hat 1
$4.95
- Size: 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Crossed Arrows
$4.95
- Size: 3" x 1"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Heart Eye Emoji
$4.95
- Description
- Size & Features
- Instructions
-
Size: 2" round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Paw Patrol
$4.95
- Size: 2.0" x 1.5"W
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Love Mom
$4.95
-
Size: 2" x 2"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Iron Man Mask
$4.95
- Size: 2"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Rebel Alliance
$4.95
- Size: 2"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Swirly Bumble Bee
$4.95
- Size: 2.25" x1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Star Badge
$4.95
- Size: 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Shooting Baseball
$4.95
- Size: 1.75" Tall x 3.25" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Super Star
$4.95
- Size: 2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Loki
$4.95
- Size: 3.0" x 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Thor
$4.95
- Size: 2.5" x 2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Single Music Note
$4.95
- Size: 2.5" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details