Helicopter
$4.95
- This Helicopter Stamp creates a flying fun glitter tattoo.
-
Size: 2" x 1.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Hello Kitty
$4.95
- Here Kitty...Kitty...Kitty!
- Size: 1.5"Tall x 2.0"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Hi-Ho Silver Sparkle Glitter
$4.95
Silver Glitter 1/2 oz - $4.95 "Hi-Ho Silver Away" you will go when you create amazing silver glitter tattoos. Sparkle glitter is fine and cosmetic grade....
View full product details
Hibiscus Flower
$4.95
- Floral beauty
- Size: 2" round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Horse - Fancy
$4.95
- This Horse stamp creates a glitter tattoo for the love of horses.
-
Size: 2.25" x 2.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Horseshoe
$4.95
- This Horseshoe stamp creates a glitter tattoo for the love of horses and creates good luck.
- Size: 1.75" x 2.0"
-
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Hot Air Balloon
$4.95
- Soar to new heights with this Hot Air Balloon glitter tattoo.
-
Size: 1.75" x 2.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Hummingbird
$4.95
- This Hummingbird stamp creates a glitter tattoo that is sweet and special.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.0" tall x 2.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Husky Dog
$4.95
- Sweet Husky Puppy
- Size: 2.5" x 2.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Ice Cream Cone
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.75" tall x 1.25" wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Indian Head
$4.95
- This Indian Head Mascot stamp creates a glitter tattoo for support of your team.
-
Size: 2.0" Round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Infinity
$4.95
- This Celtic Love Symbol stamp creates a glitter tattoo that stands out from the rest.
- Size: 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Infinity Heart #1
$4.95
- Size: 2.5" x 1.25"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Infinity Heart #2
$4.95
- Size: 2.5" x 1.25"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Jack-O-Lantern
$4.95
- Size: 1.5"Tall x 2.5"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Jesus Fish
$4.95
- This Jesus Fish stamp creates a glitter tattoo to show your love for our Savior Jesus Christ.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
-
Size: 2.75" x 1"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Jet Plane
$4.95
- This Jet Plane glitter tattoo will take you to new heights.
-
Size: 1.75 x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Jingle Bell
$4.95
- Size: 1.25" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Key
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
-
Size: 3" Tall
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Kitty Cat
$4.95
- Your heart will purr and sparkle with this fun Kitty Cat glitter tattoo.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.5" tall
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Kitty Cats in Love
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.5" tall
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Krypton Crystal
$4.95
-
Size: 2.25 x 2.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Lady Bug
$4.95
- This Lady Bug glitter tattoo will be sure to make you smile.
-
Size: 2.0" x 1.75"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Leg Lamp
$4.95
- Size: 3.5" x 1.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Lollipop Pad Packs
$4.95
Lollipop pad to apply glitter tattoos. Multiple brush packs available.
View full product details
Longhorn
$4.95
- This Longhorn Stamp creates a fun fan glitter tattoo.
-
Size: 3.0" x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Love
$4.95
- Perfect for a little sparkle.
- Size: 1.5" Tall x 2.5" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Majestic Blue Sparkle Glitter
$4.95
Blue Glitter 1/2 oz - $4.95 You won't be "blue" when you create amazing blue glitter tattoos. Sparkle glitter is fine and cosmetic grade. Glitter is...
View full product details
Manatee
$4.95
- The Manatee stamp creates a nautical glitter tattoo that shows your love of the sea.
-
Size: 2.0" x 1.0"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mandalorian
$4.95
- Size: 2"Tall x 2.5"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mario
$4.95
- Size: 2" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mario Mushroom
$4.95
- Size: 2" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Maui
$4.95
- Size: 1.75" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Max - Grinch Dog
$4.95
- Size: 2.5" x 1"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Medium Application Kit
$53.67
JEMS Body Art Medium Application is a great way to get started in creating amazing body art. This kit is enough product to apply approximately...
View full product details
Megaphone
$4.95
- This Megaphone stamp brings C-H-E-E-R and S-P-A-R-K-L-E to anyone that wears it.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
-
Size: 2.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Menorah
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.5" tall x 2.0" wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mermaid 1
$4.95
- Under the Sea Mermaid
- Size: 2.5" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mermaid 2
$4.95
- Mystical mermaid.
- Size: 2.25"Tall x 1.5"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mermaid with Jellyfish
$4.95
- Mystical mermaid.
- Size: 2.75"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Mickey & Minnie Dancing
$4.95
-
Size: 2.5" x 2.0"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Midnight Black Sparkle Glitter
$4.95
Black Glitter 1/2 oz - $4.95 Create dramatic glitter tattoos with the very black glitter. Glitter is fine and cosmetic grade. Glitter is designed for the...
View full product details
Mike - Monsters Inc
$4.95
-
Size: 2.0" Round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Minecraft
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
MINI STAMP - 6 Petal Flower
$2.95
- Perfect for a little sparkle.
- Size: 1.5" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
MINI STAMP - Amazing Grace 2
$2.95
- Perfect for a little sparkle.
- Size: 1.5" Tall x 1.o" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
MINI STAMP - Autobot
$2.95
- Perfect for a little sparkle.
- Size: 1.25" Tall x 1.5" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
MINI STAMP - Awareness Ribbon w/ Heart
$2.95
- Perfect for a little sparkle.
- Size: 1.75" Tall x 1.25" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details