Fancy Butterfly
$4.95
- This cute butterfly glitter tattoo will be sure to make you smile.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.0"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Fancy Cross
$4.95
- Let your faith sparkle with this large Fancy Cross glitter tattoo.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
-
Size: 3.25" x 2.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Fancy Heart
$4.95
- The Heart stamp creates a fancy & beautiful glitter tattoo to show your love.
-
Size: 2" x 2"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Feather
$4.95
-
Size: 5" Long; 3" Long
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Fighting Yellow Jacket
$4.95
- Size: 2.25" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Firecracker
$4.95
- Size: 2.25" x 1"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flag of Israel
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.5" tall x 2.0" wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flames
$4.95
- Size: 3.0" x 1.82"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flaming Baseball
$4.95
- Perfect for a little sparkle.
- Size: 1.75" Tall x 3.5" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flaming Football
$4.95
- Perfect for a little sparkle.
- Size: 1.25" Tall x 3.5" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flaming Soccer Ball
$4.95
- Perfect for a little sparkle.
- Size: 1.75" Tall x 3.5" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flash
$4.95
- Bring out your super hero side with this Flash Lightening glitter tattoo.
-
Size: 2.0" round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Floating Fairy
$4.95
- Thinking about fun Fairy
- Size: 1"Tall x 2.25"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Floral Bunny Egg
$4.95
- Size: 2.25" x 1.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Floral Scrolls
Sold Out
- Size: 3.0" x 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Floral Scrolls - short
$4.95
- Size: 3.0" x 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Floral Vine
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
-
Size: 4" x 1.5"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flower Snowflake
$4.95
- Get into the frozen spirit of the season with this special snowflake glitter tattoo.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.25" round
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flower with Stem
$4.95
- This cute Flower with Stem glitter tattoo is sure to bring a smile to your face.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.5" x 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flying Dragon
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.5" tall x 2.0" wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flying Dragon 2
Sold Out
- Size: 2.5" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Flying Witch & Cat
$4.95
- Size: 3.5" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Football
$4.95
- This Football stamp creates a glitter tattoo to support your favorite team.
-
Size: 2.5" x 1.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Football Helmet
$4.95
- This Football Helmet stamp creates a glitter tattoo to support your favorite team.
-
Size: 1.75" x 1.75"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Frankenstein
$4.95
- Size: 2" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Frozen
$4.95
- Let it go.
- Size: 2"Tall x 1.5"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Galactic Empire
$4.95
- Size: 2"Tall x 2"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gerber Daisy
$4.95
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
- Size: 2.5" tall x 1.75" wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Ghost 2
Sold Out
-
Size: 2.5" x 2.25"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gingerbread Man
$4.95
- Size: 2.5" x 1.5"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Glitter Brush
$3.25
Used during application of glitter tattoos. NOTE: Colors & styles vary.
View full product details
Glitter Tray
$17.95
Recycle and collect your extra glitter using this convenient tray.
View full product details
Gnome 1
$4.95
- Size: 2.25" x .75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gnome 2
Sold Out
- Size: 2.25" x 1.25"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
God Bless America
$4.95
- The God Bless America stamp creates a patriotic glitter tattoo that shows your patriotism at any function.
-
Size: 2.25" x 1.75"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gold Nugget Sparkle Glitter
$4.95
Gold Glitter 1/2 oz - $4.95 Your amazing glitter tattoos will look like a "Million Bucks" with this shiny gold glitter. Sparkle glitter is fine and...
View full product details
Goofy
$4.95
- Size: 2.5"T x 2" W
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gothic Cross
$4.95
- Size: 2.0" Tall x 2.0" Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Grinch
$4.95
- BaHumbug!
- Size: 2.0"Tall x 1.5"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Grinch Hand
$4.95
- BaHumbug!
- Size: 2.0"Tall x 1.75"Wide
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with G. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gryphon
$4.95
- Create mystical glitter tattoos with this cool Griffin tattoo.
- It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
-
Size: 2.25" x 1.75"
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gryphon2
$4.95
- Size: 1.75" x 1.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gymnast #1
$4.95
- Size: 3" x 2.25"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gymnast #2
$4.95
- Size: 3.25" x 2.0"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Gymnast #3
$4.95
- Size: 3.0" x 2.75"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Half Skull
$4.95
- Size: 2" Round
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Halloween Cat
$4.95
-
Size: 2.5" tall
Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) -
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details
Happy Easter Egg
$4.95
- Size: 2.5" x 2"
- Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
-
Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
Recommendations:
We suggest that body art only be placed on arms and lower legs, not on faces.
Do NOT let adhesive to freeze, it will turn solid.
To remove body art, gently rub with alcohol or baby oil.
To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.
View full product details