Dream Catcher

$4.95

• Description
• Size & Features
• Instructions

• Size: 3" tall
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dream Catcher 2

$4.95

• Description
• Size & Features
• Instructions

• Good dreams!
  
• Size: 3"Tall x 1.5"Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dreidel

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Dripping Heart

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Eagle Shield

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2" Round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Egg Cross Heart

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Eye

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Eye Rolling Emoji

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Fancy Heart

$4.95

• Description
• Size & Features
• Instructions

• The Heart stamp creates a fancy & beautiful glitter tattoo to show your love.
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flag of Israel

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flames

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 1.82"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Floral Bunny Egg

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.25" x 1.75"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Floral Scrolls

Sold Out $4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Floral Scrolls - short

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flower Snowflake

$4.95

• Description
• Size & Features
• Instructions

• Get into the frozen spirit of the season with this special snowflake glitter tattoo.
• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jembodyart.com.
• Size: 2.25" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flying Dragon 2

Sold Out $4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Flying Witch & Cat

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.5" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Gothic Cross

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.0" Tall x 2.0" Wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Half Skull

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" Round
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Happy Easter Egg

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Heart Eye Emoji

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Heart Wings 2

$4.95

• Description
• Size & Features
• Instructions

• Soar to new heights with this Heart Wings glitter tattoo.
• Size: 2.5" x 1.25" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Heart with Awareness Ribbon

$4.95

• Description
• Size & Features
• Instructions

• The Heart with Awareness Ribbon stamp creates a beautiful glitter tattoo to show your love and support.
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Infinity

$4.95

• Description
• Size & Features
• Instructions

• This Celtic Love Symbol stamp creates a glitter tattoo that stands out from the rest.
• Size: 2" 
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Infinity Heart #1

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 1.25"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Kissing Mickey & Minnie

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2.5" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Loki

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Love Heart

$4.95

• Description
• Size & Features
• Instructions

• This Awareness Ribbon stamp creates a glitter tattoo that reminds us of our fight to rid cancer, wear it with pride.  
• Size: 2.5" x 1.5"
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Love Mom

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Mandalorian

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.0" x 1.75"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Menorah

Sold Out $4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Minecraft

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.) 
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Mother with Baby

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 3.0" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Mushroom

$4.95

• Description
• Size & Features
• Instructions

• It's Fungi - Mushroom
• Size: 2.5" x 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Music Notes

$4.95

• Description
• Size & Features
• Instructions

• This Music Notes (2 pieces) stamp creates a glitter tattoo for the musician.
• Size: 2.0" x 2.0" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Open Heart

$4.95

• Description
• Size & Features
• Instructions

• The Heart stamp creates a fancy & beautiful glitter tattoo to show your love.
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Parrot

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 4.5" tall x 1.75" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Paw Heart

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 2.0" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Peace Fingers

Sold Out $4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 1.5" tall x 2.0" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Peace Sign

$4.95

• Description
• Size & Features
• Instructions

• This Peace Sign stamp creates a glitter tattoo to show off your groovy side. 
• Size: 2.0" round
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Peach

$4.95

• Description
• Size & Features
• Instructions

• Size: 2.5" x 2.0"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Pencil

$4.95

• Description
• Size & Features
• Instructions

• Size: 3.5" x .75"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Pirate Swords

$4.95

• Description
• Size & Features
• Instructions

• 
  
• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Poop Emoji

$4.95

• Description
• Size & Features
• Instructions
• Size: 2" tall
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Pot Leaf

$4.95

• Description
• Size & Features
• Instructions

• Happy Leaf
• Size: 2.5" x 2.5"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Princess Crown

$4.95

• Description
• Size & Features
• Instructions

• Size: 1.78" x 2.6"
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Puzzle Pieces

$4.95

• Description
• Size & Features
• Instructions

• Size: 2" x 2" 
  Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.

Razor Heart

$4.95

• Description
• Size & Features
• Instructions

• It's fast and easy to apply glitter tattoos using our reusable wood stamps and our clean four-step process. Check out our bundle specials that contain all you need to get started at jemsbodyart.com.
• Size: 1.75" tall x 2.25" wide
• Features: Wooden stamp is designed for the sole purpose of applying adhesive to create glitter tattoos as directed by instructions provided with purchase. (NOTE: Actual stamp may have some slight variations from picture shown here.)  
• Step 1: Clean the skin area with JEMS Skin Cleaner with a cotton ball.
  Step 2: Dry the skin with JEMS Prep Compound by lightly dusting application area and brushing it with a soft bristle brush.
  Step 3: Apply adhesive to the beveled edge of sponge brush and dab adhesive onto the desired body stamp. DO NOT brush adhesive onto the stamp, a bubble texture on the stamp is alright.
  Step 4: Roll the stamp with adhesive onto prepared skin area. It is very important to use a simple rolling motion from one side to the other, allowing adhesive to dry clear.
  Step 5: Once adhesive is clear, apply glitter using puff bottle. Gently move litter around the entire stamped area with the lollipop pad and press the glitter into the stamp pattern. Use soft makeup brush to remove excess glitter. You can save the excess glitter for a future rainbow body art.
  Recommendations: 
  We suggest that body art only be placed on arms and lower legs, not on faces.
  Do NOT let adhesive to freeze, it will turn solid.
  To remove body art, gently rub with alcohol or baby oil.
  To open bottles, press a pin into the top of the bottles. A smaller hole allows you to control the products best during the application process.